How To Set The Clock On A Kenwood Radio

Setting upwards a clock on your new Kenwood Automobile stereo may audio similar a hard dark to crack. You might want to even hire someone else to become the job done for you. But why waste your money when you can do the chore all by yourself?

No kidding! It'south way too much easier than y'all retrieve. All yous demand to do is know a piffling bit of hack and this job will be easy as a snap. Yous recall it's a bluff? Well, follow this step-by-stride guide on how to set the clock on a Kenwood Car stereo. Fifty-fifty you'll say 'Hey, this is Cake!'

Tabular array of Contents

Setting Upwardly The Clock
9 Steps To Set The Clock On A Kenwood Car Stereo
- Step 1: Turn On The Stereo
- Footstep 2: Enter Settings
- Pace 3: Observe Clock Suit Options
- Footstep four: Arrange Clock Settings
- Step v: Fix Day
- Step 6: Set Up Hours
- Step 7: Set up Minutes
- Step 8: Exit Clock Settings
- Footstep ix: Bank check
Lesser Line

Setting Upwardly The Clock

In this guide, we'll be taking the newer Kenwood auto stereos as a reference. However, if you have other models, don't be concerned. The operation is very similar on every Kenwood stereo system.

These steps will besides work on other stereo systems because motorcar stereos are built around a technology that is very much akin. And the settings behind them are too very similar likewise.

Note that older Kenwood Stereo organization like the KDC 138 has a slightly different approach to setting up the clock. We will besides give you the steps for that side by side so that you tin learn how to set the clock on Kenwood KDC 138.

9 Steps To Set up The Clock On A Kenwood Car Stereo

Follow these steps if you want to find out how you can set up the clock on your Kenwood motorcar stereo.

Pace 1: Turn On The Stereo

Turn on the stereo of your car. We're assuming you already know how to turn on your vehicle's stereo. As a upshot, we're not going to get into that kind of preamble. Simply switch on your machine'southward stereo in the regular way.

If yous apply KDC 138, switch the stereo to standby way by pressing the "SRC" button twice, and you will meet the "STBY" selection.

Footstep ii: Enter Settings

Notice that in that location is a large volume knob on your Kenwood car radio or stereo. There's no way of missing it. If you have non noticed before, there is a push-button on the volume knob. To enter the settings way, press it in one case. You lot'll be sent to the functions menu.

For the KDC 138, you'll take to press and hold the menu button on the right.

Step iii: Detect Clock Adjust Options

If yous plough your volume knob now, you tin can browse through the bones settings of the stereo. Keep turning the volume knob clockwise until you lot notice a "Clock adjust" function.

For the KDC 138, you should run across the clock function on display. At present press and concord the play/pause button to finally reach the clock settings.

Step four: Adapt Clock Settings

In one case y'all land on the clock adjusts role, press the volume knob again. Now you have entered into the clock settings of your car stereo. The next step is near irresolute the day and the hours.

Step 5: Prepare Upwardly Day

Later pressing the "clock adjust" part, you lot'll see that the day on your stereo is blipping. It ways that this parameter is ready to be edited. When you turn the volume knob now, you'll discover that the days change with it. Fix the verbal day, and so press downwardly the volume knob over again.

In KDC 138, the D-pad on the right will help you change the fourth dimension parameter values.

Step 6: Gear up Hours

Subsequently pressing it, y'all'll run into that time blipping has shifted to the time parameters at present. Follow the aforementioned procedure on the hours by turning the volume knob left or right and once yous are done, press the volume knob downward once once again.

The upwards/down buttons of the D-pad on your KDC 138 volition let you lot alter the hours. Then move forward to modify the minutes.

Footstep vii: Set Upwardly Minutes

At present yous accept blips on your minute parameter. You can edit it the same way you lot edited it in hours. Turn the volume knob left or right to go your desired value. The D-pad left/correct of your stereo tin also change the minutes.

Pace eight: Leave Clock Settings

After you're done setting up the fourth dimension, press the back button under the volume knob. Some stereos don't accept information technology, so you but have to get your stereo out of the Standby mode.

At that place, you are washed with the process of how to set time on Kenwood radio.

Step 9: Check

To check if information technology worked, plow off the stereo of your machine. Start your car and see if the stereo system is showing the correct time. It should work fine. Now, you tin can see the proper time and day on your Kenwood car stereo system.

Bottom Line

Learning to set up the clock of your car stereo is vital if you lot want to know the verbal fourth dimension from your auto stereo and you have to alter it oft. Manufacturers' manuals are sometimes likewise hard for people to comprehend.

And then here we are, giving you the easy pace-by-step guide on how to set the clock on a Kenwood car stereo. Hopefully, from now on, you'll be able to adjust the fourth dimension on your car stereo.

Related Guides for Kenwood Users: